PRODUCTS
- Distribution Transformer
- Resin Casting Dry Type Power Transformer
- Whole-sealed Type Distribution Power Transformer
- Electrical Power Fitting
- Power Transmission and Distribution Fittings
- Power Line Fittings
- Power Line Helical Fittings
- High Voltage Outdoor Electrical Equipment
- Copper and Aluminum Contact Arms
- Lightening Protection Grounding Clamps
- Electric Wire & Cable and Accessories
- Rubber Sheathed Cable for General Purposes
- Rubber Insulated Cables Used in Open Countr
- Flame-retardant Rubber Sheathed Cables for Mining Purposes
- PVC Insulated Cable for House Wiring
- XLPE Insulated Power Cable
- PVC Insulated Power Cable
- Low-smoke Halogen-free Flame-retardant and Fire-resistant Cables
- Control Cables
- Overhead Conductors and Cables
- Aluminum wire and ACSR
- Special Cables
- Elevator Cable
HOTLINE
0577-57157777
Rubber Sheathed Cable for General Purposes
Electric Hoist Cable
- Share:
1. Standard
Q/YL09-2008
This product is used as the power connection wire of electric hoist and similar products of rated voltage 300/500V.
YR: Rubber sheathed electric hoist cable
YRF: PCP or other equivalent synthetic elastomer sheathed electric hoist cable
|
No. of Cores * Sectional Area (mm2) |
Nominal Insulation Thickness (mm) |
Nominal Sheath Thickness (mm) |
| 6*0.75 | 0.8 | 1.5 |
|
6*1.0 |
0.8 | 1.5 |
| 7*0.75 | 0.8 | 1.5 |
| 7*1.0 | 0.8 | 1.5 |
|
8*0.75 |
0.8 | 1.8 |
| 8*1.0 | 0.8 | 1.8 |
|
9*0.75 |
0.8 | 2.0 |
| 9*1.0 | 0.8 | 2.0 |
| 10*0.75 | 0.8 | 2.0 |
| 10*1.0 | 0.8 | 2.0 |
| 11*0.75 | 0.8 | 2.0 |
| 11*1.0 | 0.8 | 2.0 |
| 12*0.75 | 0.8 | 2.0 |
| 12*1.0 | 0.8 | 2.0 |
| 13*0.75 | 0.8 | 2.0 |
| 13*1.0 | 0.8 | 2.0 |
| 14*0.75 | 0.8 | 2.0 |
| 14*1.0 | 0.8 | 2.0 |
| 16*0.75 | 0.8 | 2.0 |
| 16*1.0 | 0.8 | 2.0 |
| 18*0.75 | 0.8 | 2.0 |
| 18*1.0 | 0.8 | 2.0 |
| 24*0.75 | 0.8 | 2.5 |
| 24*1.0 | 0.8 | 2.5 |
| 30*0.75 | 0.8 | 2.5 |
| 30*1.0 | 0.8 | 2.5 |
5. Specification
1) The conductor meets the requirements of class 5 copper conductor specified in GB/T 3956-2008.
2) The rubber insulation meets the requirements of GB/T 5013-2008.
3) The sheath of YR cable adopts rubber of SE3 type, while YRF uses rubber of SE4 type. The cable sheath meets the requirement of GB/T 5013-2008.
4) The max. conductor temperature in normal use is 60℃.
-
Rubber Sheathed Flexible Cable for General Purposes
-
300/500V Rubber Insulated Cable for Fixed Installation
-
Copper Conductor Rubber Sheath Welding Cable
-
Rubber Insulated NBR Sheathed Leading Wire (JEFR)
-
Rubber Insulated NBR Sheathed Leading Wire (JXN/JBQ)
-
CCA Conductor Flexible Welding Cable
-
High temperature resistant F-class insulated AC motor winding leads
-
Universal rubber sheathed flexible cable
